Several classifications of CNC marking machines on the market

Marking machine is an important equipment used in the field of advertising production to produce edge advertising characters, also known as edge marking machine. It is specifically used to make edges for advertising characters. There are many types of advertising characters on the market now, such as mini characters, resin characters, acrylic characters, etc., which are all very popular. So, what are the several classifications of CNC marking machines on the market? Let's take a look together below

1. Unable to control machining accuracy.

Due to control and mechanical reasons, the machining accuracy is low, and the machining dimensions are consistent with the input graphic file. The length of the same contour machined each time is different. Currently, about 60% of the marking machines sold on the market are in this situation, and if these marking machines are purchased by users, they can only be used as decorations;

2. It can control the machining accuracy and achieve consistency between machining dimensions and input graphics.

Compared to similar marking machines, there has been significant progress. Operators estimate the required scaling length for each corner or arc position based on the characteristics of the contour, and then correct the contour curve in software such as CorelDraw. Usually, operators need to make repeated modifications to ensure a good match with the panel. This process is very cumbersome, prone to errors and material waste, and more importantly, inefficient, unable to achieve the characteristics of fully automated equipment. At present, imported marking machines are also at this stage and cannot provide solutions to improve efficiency;

Surrounding advertising text

3. According to the characteristics of the contour and the selected material, the length and curvature are automatically scaled. When carving, the source file is carved without the need for inward or outward scaling, allowing the edge bands to perfectly fit the panel. The fitting of panels is not an easy task, as material thickness, elasticity, sharp corners in fonts, and different writing methods can all affect the length of the edges. Our company has perfectly solved this problem through the built-in high-precision compensation mode in the software, which can achieve unified panel files and output three types of three-dimensional characters: outsourced, leveled, and embedded, meeting the requirements for high-precision characters.

The above is the complete content of several categories of CNC marking machines on the market. I hope this article can be helpful to everyone.